KUMAVISION factory
See also the following ChangeLogs
28.4.4232.0 - 2026-08-20
Hotfix
- Fixed assignemnt of line numbers in Field Service Components (#18415, FCY-2668) If line were added manually to the field service components, the line number was not calculated automatically
- Fixed calculation of obligo with different untis of measure (#18520, FCY-2687)
- Fixed synchronisation of attribute values into fields (#18550, FCY-2686) If a attribute was to be synchronized into a field on the item table, an error could occur that the data types did not match
- Fixed error on modifying routing no. in the production order lines (#18560, FCY-2693) The first manual change of a routing no. on a production order line always resulted in a error
Change
- Job references will now never be copied in copy sales document (#18418, FCY-2669)
- Added additional telemetry-signals (#18499, FCY-2684) Values for number of production orders and production order components were added
- Added missing translations on service setup (#18522, FCY-2673)
28.4.4204.0 - 2026-08-12
Hotfix
- Calculation: Work Place Conditions were not respected according to the calculation date (#18145, FCY-2626)
If a calculation was created with a different calculation date, the workplace conditions were found by the workdate fcy 28.2 Arbeitsstellen Kalkulationskonditionen mit Start- und Enddatum werden nicht korrekt berücksichtigt. Szenario: aus der 28.2 DevSuite https://kvsenavdev872.dev.intra/bc?tenant=jar Für die Abteilung 1 sind zwei Kalkulationskonditionen mit den Gem.-Kostensätzen 100€ (Enddatum 30.6.26) und 170€ (Startdatum 1.7.26) angegeben. Der Fertigungsartikel 1000 wird mehrmals kalkuliert: 1. Kalkulation (Kalkulationsdatum = 30.6.26, Arbeitsdatum = 30.6.26) ==> Einstandspreis (/fest) neuster = 14.349,19 (Fert.-Gemeinkostensatz = 100€) ==>Ergebnis okay 2. Kalkulation (Kalkulationsdatum = 01.07.26, Arbeitsdatum = 30.6.26) ==> Einstandspreis (/fest) neuster = 14.349,19 (Fert.-Gemeinkostensatz = 170€) ==>Ergebnis falsch 3. Kalkulation (Kalkulationsdatum = 01.07.26, Arbeitsdatum = 01.7.26) ==> Einstandspreis (/fest) neuster = 24.016,19 (Fert.-Gemeinkostensatz = 170€) ==>Ergebnis okay 4. Kalkulation (Kalkulationsdatum = 30.06.26, Arbeitsdatum = 01.7.26) ==> Einstandspreis (/fest) neuster = 24.016,19 (Fert.-Gemeinkostensatz = 100€) ==>Ergebnis falsch Das Arbeitsdatum darf m.E. keine Auswirkung auf das Kalkulationsergebnis haben. Im Übrigen ist dieser Effekt bei Artikel Kalkulationskonditionen nicht nachzuvollziehen. Ergänzung: Das Arbeitsdatum hat - Calculation: calculation tracking lines were not deleted when sales lines were deleted (#18194, FCY-2636)
- Fixed lenght of the field KVSFCYVAT Bus. Posting Group in Ship-to Address (#18291, FCY-2641)
- Fixed Planned Starting Date on Sum lines in the project tasks (#18299, FCY-2643) The Planned Starting Date in the project task could were displayed incorrectly on lines with Type "Sum"
- Fixed Packing Location Codes on Dispatch Handling Orders with Delivery Schedules (#18329, FCY-2652) On Dispatch Handling Orders which were created with delivery schedules the Packing Location Codes were not filled correctly
- Fixed update on sales document lines with calculation (#18348, FCY-2655) If sales lines got a new price because of calculation actions, the page was not updated correctly
- Fixed functionality on Create Label File in Released E+D Order (#18355, FCY-2658) On the action "Create Label File" in the released E+D-Order no label file was created
- Fixed double confirm on changing shipment date on orders (#18375, FCY-2645) If the shipment date on an order was changed, a confirm was shown twice. This was fixed
- Fixed E+D Position No. on reseparating E+D Order (#18434, FCY-2672) If a separated E+D Order was resaparated, the E+D Position was not correct
- Fixed replan on E+D-Order with separate orders (#18449, FCY-2666) If a E+D-Order was replanned, the separate production orders were not replanned
- Fixed change on E+D manufacturing policy on replanning (#18457, FCY-2679) If a production order was replanned, the E+D manufacturing policy was alwas set to Make-to-Stock
Change
- Removed sales condition "Sales Price" (#18198, FCY-2639) The functionality was moved to KUMAVISION base
- Etagis Interface: added new parameter "Modified" in integration event (#18313, FCY-2647)
- Changed Drill-Don in Project Account Schema (#18379, FCY-2654) The Drill-Down change signs if performed on value entries
- Changed check on reservation entries on project status change (#18391, FCY-2662) The check on existing reservation entries does now not respect order tracking entires
- Set Blanket Delivery Schedule to obsolete (#18401, FCY-2579) The Blanket Delivery Schedule was set to obsolete and will no lneger be supported
28.3.4098.0 - 2026-07-16
Change
- Added telemetry data for copy production document (#17749, FCY-2496)
Added telemetry to log the usage of the reportExtension 5026356 KVSFCYCopyProdOrderDocumentExt. - Set field "Comparison Version" in table KVSFCYJobAccSchedColLayout to obsolete (#18277, FCY-2631) The field has no functionality and will be removed in the future
28.3.4086.0 - 2026-07-14
Hotfix
- Fixed missing confirm in change status on calculation tracking lines (#17980, FCY-2615) A confirm was added if the user changed the status on already Implemented lines
- Fixed wrong update in sales quote page (#18116, FCY-2630) The sales quote page was not updated if a user used the action "Calculation Tracking Lines". If the user changed the unit price in the calculation and went back to the sales quote, the subtotals were not updated on the lines subpage
- Fixed wrong "Doc. No Occurence" in calculation tracking lines (#18118, FCY-2629) If a calculation tracking line was added manually to a sales quote, the corresponding production order was not found if the line was calculated again
- Fixed wrong quantity in "Qunatity Invoiced" in sales shipment line (#18204, FCY-2633) The "Quantity Invoiced" could be wrong in sales shipment lines after posting in the following case: the order was created from a project and contained lines of type "Resource" or "G/L Account".
Change
- Removed actions "New" and "Delete" on delivery schedules (#17796, FCY-2586) The actions had no effect and could not bes used
- Set page KVSFCYDispatchingTemplList to obsolete (#17797, FCY-2587) The page KVSFCYDispatchingTemplates will be used istead of the page KVSFCYDispatchingTemplList
- Added Demo-Data creation for delivery schedules (#17918, FCY-2403)
- Changed caption to "Delivery Schedule" in group "Automotive" Ship-to Adress page (#17984, FCY-2618)
- Changed test on empty bin code in purchase delivery schedule (#17985, FCY-2617) It was not possible to assign a vendor with empty location code to a purchase delivery schedule. If such a vendor was used, an error was thrown, that a location with bin mandatory must be used. This test was moved to a status change of a purchase delivery schedule to released.
- Added actions to show transfer orders and posted transfer shipments (#17996, FCY-2611) In the delivery schedule actions were added to show transfer orders and posted transfer shipments
- Changed default versions on release order comparison (#17997, FCY-2609) By default, the actual version was shown on the left and the old version on the right. This order was changed.
- Changed test on bin code in delivery schedule (#17999, FCY-2552) If a bin code was chosen in the delivery schedule, an unnecessary message could appear. The message was removed.
- Set report 5026442 KVSFCYProdOrderCompAndRouting to obsolete (#18023, FCY-2613) The report was not used and therefore set to obsolete
- Changed component bin code at change of capacity unit (#18024, FCY-2619) If the capacity unit in a production order routing line was changed (for example from work center to machine center), the To-Production Bin Code was not respected
- Added service line factbox "Service line details" (#18113, FCY-2621)
- Changed action "Open Sales Invoice/Credit Memo" on Job Invoices (#18192, FCY-2637) If a job onvoice is a posted invoice / credit memo, the corresponding page is now openend
28.2.3983.0 - 2026-06-16
Hotfix
- Fixed error on "Description 2" in E+D modification proposal (#17799, FCY-2581) The field "Description 2" was alway suggested in the E+D modification proposal, regardles of changes
- Fixed error on production order in combination with production BOMs (#17843, FCY-2588) If a production order was calculated with nmultiple production BOMs not all production BOMs were exploded
- Fixed error on "Unit Cost (LCY)" in project planning lines (#17933, FCY-2603) If a project planning line was created by a sales line, the "Unit Cost (LCY)" could be different
- Fixed error on printing of report KVSFCYInboundReleaseOrder (#17953, FCY-2612) If no langauge code was set in the delivery schedle, an error was thrown on printing the repoort
Change
- Added handling of standard service codes in service contracts (#17731, FCY-2471)
- Change caption on field "Type" in dispatching template (#17795, FCY-2585) The caption of the option "Replenishment Code" on field type in the dispatching template was change to "Poduction Code"
- Changed action "Create purchase orders" in project (#17823, FCY-2503) The standard functionality was changed to match the logic of purchase order creation in KUMAVISION factory
28.1.3884.0 - 2026-05-21
Hotfix
- Fixed the inheritance of dimensions to purchase documents from projects (#17581, FCY-2497) If a purchase document was created directly from a project, the dimensions were only inherited if reserve was set to "Never"
- Fixed filter on discount conditions (#17692, FCY-2507) If a user tried to get a discount condition in a sales docuemtn, the filter was set to price conditions
- Fixed conversion of unit of measures in order calculation (#17725, FCY-2146)
If a plan value was used in an order calculation, the unit of measures were not converted. Instead the base unit of measure was used
to calculate the direct cost
Change
- Added Integration of Microsoft Dynamics 365 Field Service (#17299, FCY-2414) It is now possible to communicate with Microsoft Dynamics 365 Field Service even if service item components were used. The standard Microsoft Connector does not allow the usage of service components.
- Set action "Make Supply Orders" in E+D Order Planning to obsolete (#17364, FCY-2468) This action will be removed, use "Make Orders" instead
- Set page KVSFCYEDOrderPlanning2 to obsolete(#17698, FCY-2510) This page will no longer be supported, use KVSFCYEDOrderPlanning instead
- Changed cue calculation on rolecenter FCY Production (#17739, FCY-2540) The cues will now always show the correct number of documents
28.1.3836.0 - 2026-05-12
Hotfix
- Changed debit account and credit account in wip rating (#17614, FCY-2500)
Change
- Changed creation of purchase documents from projects (#17410, FCY-2353) If purchase documents are created from a project, multiple documents can be created. The created documents are grouped by vendor and locations.
28.0.3797.0 - 2026-04-27
Hotfix
- Calculation conditions were used even when the calculation module was not active (#17389, FCY-2445)
- Fixed captions on chnaging status in the calculation worksheet (#17415, FCY-2476)
- Added missing reversal entries on posting WIP (#17525, FCY-2481)
Change
- Disabled actions in projects (#17303, FCY-1625) If an action is not available for a specific line type (for example tracking for project planning lines of type resource) the action is disabled
- Added new role center with E+D-Orders (#17509, FCY-2114)
28.0.3767.0 - 2026-04-20
Hotfix
- Changed dimension inheritance on production orders (#17304, FCY-2444) If a production order was created by a project, the dimensions will be inherited from the project
- Fixed error with dimensions on creation of requisition lines (#17308, FCY-2443) If a requisition line was created from a project and sent to a combined purchase quote, the dimensions on the resulting quote could be wrong
Change
- Changed functionality "Create new Company" (#16712, FCY-2096) Changed the functionality, so that the Contoso-Demo-Data can now be created with an installed KUMAVISION factory
- Set project related fields in extended texts to obsolete (#17239, FCY-2021)
- Changed functionality of "Description 2" in multiple tables (#17323, FCY-2425) Microsoft added the field "Description 2" on multiple pages and tables. The KUMAVISION factory functionality was changed to respect this change
- Added action "Show Document" on "Prod. Order Comp. Line List" (#17345, FCY-2452) Added action to show the corresponding production order card
- Changed permissions for etagis interface (#17398, FCY-2474) Permissions for assembly orders added